Learn to glue gems with these

mistsarker123

Heating the stone and sealing wax is not enough. You must develop your own technique to ensure a bond that protects the gem and allows you the perfect cut. Find out my suggestions here! How to glue gems to the toothpick to carve them. Gemstone Cutting Blog. Sapphire and ruby ​​cutting. When you are starting out in gem cutting, one of the essential steps is to correctly glue the stone to the toothpick to ensure that the final faceting is the desired one. However, although it is an essential activity that is easy for many, it takes a little more time for others. Among the aspects that usually delay the process are the inappropriate position of the fingers to mold the sealing wax, the lack or excess of temperature in the paste, overheating of the stone, and inappropriate use of the centerer. “If you heat it too much, the stone can break.

If you heat too little, the paste will not set properly.” Therefore, if you Country Email List are studying stoning, or if you are considering learning, I share these 5 tips. If you follow them, you will most likely find it easier to complete this pasting step: 1. Heat the stone until you see evaporation. This step is crucial so that the stone can adhere to the sealing wax. You will see on its surface how it begins to evaporate. When you no longer see moisture, that will be a sign that the stone already has enough heat. Be careful not to exceed the temperature, or the gem could burst. 2. Heat the sealing wax paste until bubbles appear.




If you have worked with sealing wax before, you will know that when it is hot it can be molded as you would with plasticine. The bubbles will tell you that it is ready. Use an industrial alcohol lighter and be careful not to burn yourself. 3. Knead the sealing wax in a spiral shape. Kneading the sealing wax until it forms a spiral will allow the paste to accumulate towards the end of the stick, and increase the bonding surface with respect to the stone. 4. Join the stone to the sealing wax. In this step, help yourself with your fingers. Keep molding until the sealing wax comes together completely. Make sure that both the stone and the sealing wax are at the same temperatures. 5. Use the centerer. The centerer will help you place the stone in a central position with respect to the stick. It is an essential tool to achieve the faceting you are looking for. If you follow these tips, it will surely be easier for you to glue the stone.